Home / Produkter / Exhaust air heat pumps / ComfortZone RX65

ComfortZone RX65

Do you need to heat a large house (which is around 180 – 260 m²) and are looking for an easy-to-maintain heat pump that is not only reliable, but emits minimal noise and is quite nice to look at?

Then maybe the exhaust air heat pump RX65 (formerly called EX) is something for you. With its award-winning interface and 170 liter water heater, you get up to 6.5 kW and a heat pump that lasts a long time.

Living space:
New estate:
Find Retailer

Heat pump with lower total cost, which is kinder to the environment

We dare to bet that you will not find a heat pump on the market that gives you a lower total cost than ours. In addition, thanks to the refrigerant R32, it is a more environmentally friendly choice and you get a higher efficiency. This refrigerant is now included in all models in our RX series.

Exhaust air heat pump RX65

  • Award-winning interface
  • Gives you by far the lowest total cost
  • Low noise level
  • High efficiency
  • More environmentally friendly than previous models

Interested in the product? Find your nearest retailer here!

Unit RX65
Output/Input power at 20(12)/35°C kW 6,3/1,6*
Output/Input power at 20(12)/50°C kW 6,5/2,1*
Electric cartridge, power (kWh) kW 6,0/9,0**
Refrigerant R32 kg 1.250
Air flow m³/h 220-330
Flow circulation pump (20 kPa) m³/h 0,8-2,0
Hot water temperature (adjustable) °C 50-60
Water volume accumulator tank I 170
Hot water capacity l/h 320/380** l/h
Voltage V 400 (3-phase+N)
Alternative voltage V 230 (3-phase+N)
Fuse A 16
Height mm 2100
Width mm 600
Depth mm 650
Weight kg 210
Temperature sensor out+in out or in

* The power data at 20(12)/35 °C and 20(12)/50 °C are stated according to European standard EN255 without fans and pumps. Indicated temperatures 20°C indicates the air temperature of indoor air and (12)°C indicates the wet temperature of the air link.

** Supplied with 6 kW electric cartridge. The cartridge is adjustable so that, at the time of installation, it can be adapted to Swedish building regulations for newly built houses.

ATTENTION! When comparing with geothermal heat pumps, the power consumption of the brine pump must be taken into account. Corresponding geothermal heat pump loses up to 10-20% input power and COP through the pump that pumps the refrigerant from the borehole itself 100-150 m up and down. All data is preliminary


Välj rätt produkt för ditt vattenburna system genom att följa 5 enkla steg nedan.

1. Hur stor är bostadsytan?

2. Vilket typ av projekt?

3. Du har valt

4. Välj någon av modellerna

5. Har ditt hus mekanisk tillluft?

Var god kontakta en av våra återförsäljare för konsultering